Stability Chamber (Humidity Chamber)

CONSTRUCTION:

Double walled construction -
STD MODEL- Inside: S.S. 304 with dull finish / Outside: G.I. Epoxy
                    powder coated with seven tank Process
GMP MODEL- Inside: S.S. 316 dull finish / Outside: S.S. 304 dull finish

> CFC Free PUF(Poly Urethane Foam) Insulation Upto 80ºC
> Full Length Acrylic / Glass viewing door attached with heavy duty latch and hinges.
> Silicon gasket at inner door to avoid Temp.and Humidity losses.
> Magnetic gasket at outer door.
> Spring loaded auto door closure facility.
> Imported chamber lights are used for illumination and Human safety.
> For validation.: 50mm dia Porthole of silicon cork.
> The chamber rests on nylon bullet feet built in screwing adjustment for easy movement.
> Adjustable channels are provided to adjust the tray at every ½ inch.
> 100 % usable area with 25% extra space to maintain uniformity.
> Compact handle, S.S. lock, High CFM blower.
> Microprocessor based Safety Control System.
> S.S. wiremesh tray duly electro Polished.

TECHNICAL SPECIFICATION:

Model STD/GMP	Capacity In Ltrs.	Dimensions in CMS						No. of Trays	Power Rating
		Internal			External
		W	D	H	W	D	H
MK-10-BO	100	50	45	45	70	75	140	2	2kw
MK-20-BO	200	50	60	70	70	90	165	2	3kw
MK-40-BO	400	60	70	95	80	100	195	3	4kw
MK-60-BO	600	80	75	100	100	105	200	3	4kw
MK-80-BO	800	80	80	125	115	135	190	4	6kw
MK-100-BO	1000	90	90	125	125	145	190	4	7kw
MK-S-100-BO	1000	80	80	160	115	135	180	4	7kw
MK-S-200-BO	2000	150	70	200	185	135	216	8	9kw
MK-S-300-BO	3000	150	100	200	185	160	216	8	9kw

Photo Stability Chamber

CONSTRUCTION:

Double walled construction -
STD MODEL- Inside: S.S. 304 with dull finish / Outside: G.I. Epoxy
                    powder coated with seven tank Process
GMP MODEL- Inside: S.S. 316 dull finish / Outside: S.S. 304 dull                      finish

> CFC Free PUF(Poly Urethane Foam) Insulation Upto 80ºC
> Silicon gasket at inner door to avoid Temp. losses.
> Magnetic gasket at outer door.
> Spring loaded auto door closure facility.
> The chamber rests on nylon bullet feet built in screwing adjustment    for easy movement.
> 100 % usable area with 25% extra space to maintain uniformity.
> Compact handle, S.S. lock, High CFM blower.
> Microprocessor based Safety Control System.

For confirmatory studies, samples should be exposed to light providing an overall illumination of not less than 1.2 million lux hours and an integrated near ultraviolet energy of not less than 200 watt hours / square meter to allow direct comparison to be made between drug substance and drug product.

Some of its Features are:

> U.V Lights get switched OFF automatically once you open the door.
> You can test the samples on Fluorescent Light OR on U.V. Lights    separately as well as combinely.
> You can test the samples first by Fluorescent Light and then by U.V.    Light and then by both automatically or vice-versa. You just need    to set the time period between each test.

For both the model mentioned below we will be providing the light effect Horizontally above the tray for better effect.