Inner Chamber         :   Stainless Steel

Temperature Range  :   50 Deg C to 250 Deg C OR

                                        upto 400 Deg C

Accuracy                  :   Better than +/- 1 Deg C

Outer Chamber         :   MS Powder coated / SS

Chamber Size           :   350 x 350 x 350 mm  -  43 liter   

        [WHD]                :   450 x 450 x 450 mm  -  91 liter   

                                  :   450 x 600 x 450 mm  -  122 liter 

                                  :   600 x 600 x 600 mm  -  216 liter 

                                  :   600 x 900 x 450 mm  -  243 liter 

                                  :   600 x 900 x 600 mm  -  324 liter 

Application:

Specially designed to meet the requirement for incubation of Bacteria to decompose organics matter in waster water. It is used for biology, Botany, Virology and Oceanoloraphy. Water pollution, sewage, agriculture, food and research departments also use it. In addition to this, it helps in preservation of vaccines. It provides a wide range of conditions for study of synthesizing organisms. Temperature ranges from 5 Deg C to 50 Deg C, is attainable within the cabinet to the study the growth of organisms under tropical or temperature and summer or winter conditions. Temperature is controlled with an Electronic Digital Temperature Controller cum Indicator with an accuracy of +/- 0.5 Deg C  or better

Construction :

BOD incubator is double walled cabinet with inner chamber anodized Aluminum sheet or stainless sheet 304 grade. Sealed heating elements are provided with the chamber, which is fabricated with various ribs  to adjust removable shelves specially designed to any convenient height. Outer body is made of Mild steel sheet with attractive stove enamel paint. The gap between the two walls is filled with PUFF Insulation for achieving the better temperature in minimum possible time. Two air-circulating fans are provided for uniformity of temperature. It is specially designed with tough, calm and cool, sealed compressor that is placed below the chamber along-with evaporator coil and fan cooled condenser. Acrylic sheet provides full view of the inner working space-allowing inspection of samples with disturbing the operation. Outer metal door is provided with magnetic gasket illumination lamp switch, lock and key. The body is mounted on special sturdy double castors.

Control Panel:

Control panel is provided at the top of the cabinet with Electronic Digital Indicator Cum Controller with a controlling accuracy of +/- 0.5 Deg C or better (with dual temperature display). Voltage stabilizer also built in and Voltmeter is provided near the controller.

Power Supply:

To be connected with socket of 230 V +/- 10%, 50 Hz, Single phase

Operation :

Switch and set the desired temperature (between 5 Deg C to 50 Deg C) with the help of Digital temperature Controller cum Indicator. This Controller has a dual display i.e. both the set temperature and inside temperature is displayed at the same time. The indicator has a controlling accuracy of +/- 0.5 Deg C or better.

Temperature Range   :      +5 Deg C  to 50 Deg C

Accuracy                     :      +/- 0.5 Deg C           

Power Supply               :      200-220 Volt A.C. 50 cycles.

Inner Chamber            :      Made of Stainless Steel 304

Size of chamber           :      455 x 610 x 410  mm   (WHD)

Volume                        :      113 liters - 4 cu ft

Size of chamber           :      510 x 830 x 410  mm   (WHD)

Volume                        :      173 liters - 6 cu ft

Size of chamber           :      570 x 870 x 570  mm   (WHD)

Volume                        :      282 liters - 10 cu ft

Size of chamber           :      650 x 900 x 685  mm   (WHD)

Volume                        :      342 liter  -  12 cu ft

Size of chamber           :      710 x 900 x 660  mm   (WHD)

Volume                        :      421 liters - 15 cu ft

Salient Features :

• Temperature is controlled by PID Controller
• A quiet running sealed compressor ( CFC FREE )
• Transparent Acrylic Door allows full view inspection without disturbing the temperature.
• Air circulating Fan will provide for Proper Heat circulation inside the chamber.
• Inner Chamber made up of Stainless Steel 304 and outer attractive stove enamel painted.
• Double Walled with Puff insulation to minimize the heat loss

Temperature up to 70 Deg C. Heating elements are placed in rib sat the bottom and sides. Double walled inside Stainless Steel. The door has synthetic rubber gasket. Outside Mild steel painted in epoxy powder coating with perforated adjustable shelves, two indicators and on/off switch. To work on 220/230 volts A.C.

Temp Range           :         Above Ambient  to 70 Deg C

Sensitivity             :         +/-  0.5 Deg C

Inner Chamber      :         Stainless Steel

Temperature Controlled by Digital Temperature Indicating Controller with Safety Alarm,

Double walled to work on 220 V AC

Chamber size         :         300 x 300 x 300 mm  -  27 liter

  [WHD]                  :         350 x 350 x 350 mm  -  43 liter

                               :         450 x 450 x 450 mm  -  91 liter

                               :         450 x 600 x 450 mm  -  122 liter

                               :         600 x 600 x 600 mm  -  216 liter

                               :         600 x 900 x 450 mm  -  243 liter

                               :         600 x 900 x 600 mm  -  324 liter

Ideal for reliable steaming / evaporation

Fitted with a water level indicating device and a removable flat drop on lid for concentric rings that enables the bath to be used for other work also.

Supplied with mercury in glass thermometer in thermostatically controlled water bath.

Control accuracy of +/- 1 Deg C in Digital Mode.

Full Stainless Steel Construction with energy efficient long life heaters.

Bath                      :  300 x 200 x 100 mm

Control                    :  Digital

Concentric Rings   :  6 holes of 75 mm Dia with steps of 25 mm

Heater                     :  1 kW x 1

Clear Bottom Series / Digitally Controlled

• Ideal for critical applications requiring, reliable and safe reactions, extraction’s, analysis and tests.
• A uniquely designed bath, double walled, internal and external chamber full Stainless Steel construction with a clear bottom TM  which ensures no heater burn out due to lack of water / oil.
• A floating overshoot alarm and an absolute over temperature alarm with auto cut off.
• Digital electronic PID Controller with time and temperature programmable by user.
• One SS rod for clamping and insulated handles on sides for easy handling.
• Pt 100 sensor for precise monitoring and end cycle visual indication with heater cut off.
• Results reproducible because full cycle is automatic, requiring no human intervention