LEAK TEST APPARATUS (Automatic)

Model                      :          VT 300  

Model                      :          VT 300P with Printing Facility

The VT300 is fully micro controlled equipment, fitted with – oil free single stage vacuum pump, a count down electronic timer and a LCD module for display. The vacuum displayed in the LCD module is factory calibrated. Once the required level of vacuum is achieved, the desiccators can be closed and the pump be switched off to save power.

This is used for leak checking of packed Strips / Blisters / Bottles containing tablets, capsules, sutures and liquids etc, for its air tight seal. The leakage, if any can be checked by lo adding the package inside the desiccators filled with water and by applying vacuum.

Salient Features :

¨       Fully Micro controlled operation, first time in India

¨       Simultaneous display of Time and Vacuum on display module

¨       Start Delay / Retention / Vacuum Hold Time can be set as per requirement from 0- 999 seconds

¨       16 x 2 cm Large size numerical LCD display

¨       Automatic release of Vacuum from Desiccators at the end of the test

¨       Meet USP 28 Packaging practice specification

¨       Vacuum and Time can be programmed

¨       ‘Set’ required Vacuum and count down ‘Hold Time’

¨       Built in portable, maintenance free, oil free vacuum pump

¨       A Printer Port to use the Dot Matrix printer. (Available in Model no. LT-101P only).

Technical Specification:

Vacuum level

:

Better than 600 mm of Hg at MSL

Vacuum Hold Time

:

Adjustable from 0 – 999  Seconds

Retention Time

:

Adjustable from 0 – 999 Seconds

Start Delay Time

:

Adjustable from 0 – 999 Seconds

Display

:

16 x 2 cm LCD Display

Vacuum desiccators

:

Polycarbonate (optional)

Power requirement

:

220 / 230 V AC 50 / 60 Hz

Rating

:

Less than 300 watts

Size

:

235 mm (W) x 440 mm (D) x 210 mm (H)

Weight

:

Net 12.2 Kgs. (approx)